Lazer Chiru MIPS helmet review
Views:867 Classification:blog
Lazer Chiru MIPS helmet evaluate
Lazer Chiru MIPS
Lazer
br_helmets
BR1789
1/2/2/f/122fe797f11058571b4107995bd42279c3598d53_Lazer_Chiru_MIPS_01.jpg
363g
Apart from the spectacular £59.99 / $59.99 price ticket, the Lazer Chiru’s different headlining function needs to be the inclusion of MIPS rotational affect expertise. At this worth, it’s one of many least costly helmets to incorporate the possibly brain-saving tech.
It has an in-mould development – the place the exhausting polycarbonate shell is part of the EPS foam liner – and there are 15 vents with inside channelling with two massive entry ports above the height on the entrance of the helmet.
The lid’s retention cradle, and due to this fact match, is adjusted utilizing an listed thumb wheel on the rear of the lid, dubbed the Turnfit Plus system. The strap has adjustable vertical splitters and is mounted with a regular push-fit clip.
The height is connected with push match poppers however isn’t adjustable.
The Lazer Chiru MIPS was awarded 5 stars out of 5 in Virginia Tech’s helmet safety impact tests, scoring 13 the place a decrease rating gives higher safety.
Lazer Chiru MIPS efficiency
The Chiru MIPS was exceptionally comfy to put on, with a well-shaped, impartial match. There have been no sizzling spots, stress factors or irregularities on the within of the lid.
The retention system labored effectively, incrementally and regularly tightening the match. There have been no large steps between ratchet clicks and there was loads of adjustment to get the match good.
It felt safe on my head and didn’t rattle round or bounce when using over actually tough terrain. It doesn’t match as deeply as Bell’s 4Forty or Smith’s Session, which had been additionally on check, however I by no means thought that it wanted to be deeper to really feel safer.
The listed thumb wheel had optimistic clicks when it was turned making it straightforward to regulate whereas on the transfer. The straps had been massive and cozy and simple to get tight, too.
Regardless of the pads not wanting particularly luxurious, they proved to be comfy on longer rides and remained that means even after they had been soaked in sweat.
They absorbed sweat effectively to a sure level, however after lengthy durations of using within the warmth or excessive ranges of exertion, they did turn into saturated with out drying out on the fly. This meant sweat did are inclined to drip down my forehead, however as a result of the pads weren’t as thick as one thing just like the Troy Lee Designs A1, they held much less moisture, so the dripping was extra gradual and due to this fact much less noticeable.
The Chiru is sort of sizzling, particularly once I was climbing slowly. It actually wasn’t as sizzling as others on check however Lazer might do with revisiting the vent places and sizes to assist enhance cooling. It’s not a significant difficulty, although, particularly contemplating the lid’s worth.
Though the height isn’t peak adjustable, I didn’t discover it encroaching into my field of regard on the descents, nevertheless it was current on the climbs.
I discovered the helmet’s rim touched some glasses the place their arms handed over my ears. This drawback was solely a problem with thicker armed glasses, so it’s price checking whether or not your specs are suitable with the Chiru.
Surprisingly, the Chiru MIPS labored exceptionally effectively with even large-framed goggles. There was loads of area beneath the entrance of the lid and the goggles weren’t pushed down or the helmet pushed up.
Lazer Chiru MIPS backside line
Regardless of a couple of very minor niggles, the Lazer Chiru MIPS is a subtle-looking (in black, no less than), significantly comfy to put on and really secure helmet if the worst had been to occur. If I used to be going to purchase a brand new helmet, that is the place I’d be spending my cash.
您好!Please sign in